﻿WEBVTT

00:00:05.955 --> 00:00:10.709
Connect the Spirometer Pod to Input 1 on the PowerLab.

00:00:10.967 --> 00:00:13.381
Turn on the PowerLab.

00:00:13.690 --> 00:00:16.624
Ensure the PowerLab is on for at least 5 minutes before use.

00:00:16.945 --> 00:00:20.533
Place the Pod well away from the PowerLab.

00:00:20.956 --> 00:00:29.369
Connect the two plastic tubes from the flow head to the Spirometer Pod.

00:00:29.803 --> 00:00:39.383
Attach a fresh mouthpiece and filter to the clean-bore tubing.

00:00:39.813 --> 00:00:43.620
Attach the other end of the clean-bore tubing to the three-way tap.

00:00:44.112 --> 00:00:48.861
Connect the flow head to the three-way tap.

00:00:49.248 --> 00:00:53.895
Ensure a plug is inserted into the remaining outlet on the three-way tap.

00:00:54.196 --> 00:00:59.083
Connect the pressure transducer to Input 2 of the PowerLab.

00:00:59.576 --> 00:01:04.942
Connect the tube from the pressure transducer to the port on the three-way tap.

00:01:05.621 --> 00:01:11.223
Ensure the pressure transducer's remaining outlet is capped.